How to Use Perfecxa Nebulizer (Step-by-Step + Video Guide for Fast Relief)

How to Use the Perfecxa Nebulizer

1. 1

   Wash Your Hands Thoroughly

   Before handling any nebulizer parts, wash your hands with soap and water for at least 20 seconds. This prevents contamination of the medication or mouthpiece.

   Always handle the medication cup and mask with clean, dry hands.
2. 2

   Assemble the Nebulizer

   Attach the medication cup to the T-piece connector. Connect the mouthpiece or face mask to the top of the T-piece. Attach one end of the tubing to the bottom of the medication cup and the other end to the compressor outlet.

   Ensure all connections are snug but not forced — a loose fit can cause medication leakage.
3. 3

   Add Your Medication

   Open the medication cup and pour the prescribed liquid medicine using the dropper or syringe provided. Standard fill is typically 3–5 ml — always follow your doctor's dosage instructions.

   If using a saline solution, use only sterile normal saline (0.9% NaCl).
4. 4

   Sit Upright and Get Comfortable

   Sit in an upright position on a chair or bed. Keeping your back straight allows your lungs to fully expand, improving medication absorption. Relax your shoulders.

5. 5

   Switch On the Compressor

   Plug the Perfecxa Nebulizer into a power socket and press the ON button. You should see a fine mist emerging from the mouthpiece within a few seconds, confirming it's working correctly.

   No mist? Check all connections are tight before calling for service.
6. 6

   Breathe Slowly and Deeply

   Place the mouthpiece in your mouth (or face mask over nose and mouth for children). Breathe in slowly and deeply through your mouth, hold for 2–3 seconds, then exhale gently. Continue for 10–15 minutes or until the medication cup is empty.

   Breathe at a natural pace — rapid breathing reduces the amount of medication deposited in the lungs.
7. 7

   Switch Off and Disassemble

   Once the medication is finished (you'll hear a sputtering sound and mist stops), switch off the compressor. Disconnect the tubing, remove the medication cup, and separate all parts.

8. 8

   Clean After Every Use

   Rinse the medication cup, T-piece, and mouthpiece with warm water. Shake off excess water and allow to air-dry completely on a clean cloth. Do not submerge the tubing or compressor in water. Disinfect once a week with a diluted vinegar solution.

   Never put wet parts back — moisture can encourage bacterial growth.

Common Problems & Quick Fixes

More Nebulizers You Might Like

Explore our full range of quality-checked nebulizer machines — all at the lowest prices on MyGetWellStore.